跳至主要内容

SCREW THREAD MACHINING METHOD

In Metal parts machining works, screw thread (tapping) be required.

The screw thread is mainly divided into: connecting thread and driving thread

For connecting thread, the main machining methods are: tapping, threading, turning, rolling, etc.
For transmission thread, the main machining methods are: rough and fine turning – grinding；whirlwind milling – rough and fine turning, etc.
CNC turned screw thread part
CNC turned screw thread part

The following describes the various screw machining methods:

THREAD CUTTING

Generally, it refers to the method of machining thread on workpiece with forming tool or grinding tool, mainly including turning, milling, tapping, threading, grinding and whirlwind cutting, etc.

THREAD MILLING

On the thread milling machine, the disc milling cutter or comb milling cutter is used for milling. Disc milling cutter is mainly used for milling trapezoid external thread of screw rod, worm and other workpieces. Comb milling cutter is used for milling internal and external common thread and taper thread.
CNC turning parts
CNC turning parts

THREAD GRINDING

It is mainly used to process the precision thread of hardened workpiece on the thread grinder. According to the different cross-section shape of grinding wheel, there are two kinds of grinding: single line grinding wheel and multi line grinding wheel.

THREAD GRINDING

The nut type or screw type thread lapping tool is made of soft materials such as cast iron. The parts of the processed thread on the workpiece with pitch error are grinded by forward and reverse rotation to improve the pitch accuracy. The hardened internal thread is usually eliminated by grinding to improve the accuracy.
CNC lathing parts
CNC lathing parts

TAPPING AND THREADING

Tapping is to use a certain torque to screw the tap into the pre-drilled bottom hole on the workpiece to machine the internal thread. Threading is to cut the external thread on the bar (or tube) workpiece with a die.
KYLT Precision CNC machining services (milling & turning service), Fast prototyping, Fixture/Jig/Tooling making, Aluminum die casting & plastic injection parts. Email:cnkylt@aliyun.com +008615195010186
KYLT CNC Machining Services:
KYLT CNC Precision Machined Parts:
More information about Machining Technology:
标签：

评论

发表评论

此博客中的热门博文

SELECTION PRINCIPLE OF CUTTING PARAMETERS FOR SCREW THREAD TURNING

Because the pitch (or lead) of the thread is specified by the drawing, the key to choose the cutting parameters when  turning  the screw thread is to determine the spindle speed n and the cutting depth AP. 1) SELECTION OF SPINDLE SPEED TO DO SCREW THREAD TURNING According to the mechanism that the spindle turns 1 and the cutter feeds 1 lead when turning the thread, the feed speed of the CNC lathe is determined by the selected spindle speed. The thread lead (which is the pitch when the thread is single head thread) instructed in the thread processing program section is equivalent to the feed speed VF VF = n f (1) expressed by the feed rate f (mm / R) From Formula 1, it can be seen that the feed speed VF is proportional to the feed amount F. if the spindle speed of the machine tool is selected too high, the converted feed speed will greatly exceed the rated feed speed of the machine tool. Therefore, when selecting the rotation speed of the main shaft for turning the threa...
发表评论
阅读全文

CNC MACHINE BE CLASSIFIED BY SERVO CONTROL MODE

Servo control mode to classify CNC machine tool. (1) open loop control CNC machine tool The feed servo drive of this kind of machine tool is open-loop, that is, there is no detection feedback device. Generally, its driving motor is a stepping motor. The main feature of stepping motor is that every time the control circuit changes the command pulse signal, the motor will rotate a step angle, and the motor itself has self-locking ability. The drive circuit is controlled by the pulse distributor, which controls the coordinate displacement by changing the number of pulses, the displacement speed by changing the frequency of pulses, and the direction of displacement by changing the distribution sequence of pulses. Therefore, this control mode is characterized by convenient control, simple structure and low price. The command signal flow from the CNC system is unidirectional, so there is no stability problem of the control system, but because the error of the mechanical transmission...
发表评论
阅读全文