跳至主要内容

The advantage & disadvantage of Transformer Oil

The advantage & disadvantage of Transformer Oil list follows:

Transformer Oil Advantage:

1. Transformer cooling oil has good insulation performance, good thermal conductivity and low cost.
2. It can solve the problem of large capacity heat dissipation and high voltage insulation of transformer.

Transformer cooling Oil Disadvantages:

1. Transformer cooling oil is flammable and may burn and explode when it comes to flame.
2. Transformer cooling oil is harmful to human body
3. Transformer cooling oil should be inspected regularly
4. Oil-immersed transformer has poor sealing performance and is suitable for aging. Oil leakage is serious in the operation place, which affects the safe operation of equipment and the environment at the same time.
5. Oil-immersed transformer with low insulation grade is designed and manufactured according to class A insulation.

How the oil immersed transformer to cool the oil?

1.By transformer radiator
transformer radiator
transformer radiator

2.By corrugated fins cooling wall of transformer tank

folded corrugated finwall by transformer cooler pressinging machine
folded corrugated finwall by transformer cooler pressinging machine


Transformer Tank Cooling Wall Production line:

Automatic Corrugated Fins Wall Manufacturing Line


CORRUGATED FIN FOLDING AND WELDING MACHINES

Corrugated Fins Wall Forming Machine


corrugated fins wall making machine

Full-auto PLC Corrugated Fins Seam Welding Machine


corrugated fins wall seam welding machine

Hydraulic Decoiler


steel roll feeding machine

Corrugated Fins Wall Leak Testing Machine


corrugated fins wall leakage testing machine

Want to know more?(Marketing Title)

Phone: 008615195010186
Email: cnkylt@aliyun.com

评论

发表评论

此博客中的热门博文

CNC MACHINE BE CLASSIFIED BY SERVO CONTROL MODE

Servo control mode to classify CNC machine tool. (1) open loop control CNC machine tool The feed servo drive of this kind of machine tool is open-loop, that is, there is no detection feedback device. Generally, its driving motor is a stepping motor. The main feature of stepping motor is that every time the control circuit changes the command pulse signal, the motor will rotate a step angle, and the motor itself has self-locking ability. The drive circuit is controlled by the pulse distributor, which controls the coordinate displacement by changing the number of pulses, the displacement speed by changing the frequency of pulses, and the direction of displacement by changing the distribution sequence of pulses. Therefore, this control mode is characterized by convenient control, simple structure and low price. The command signal flow from the CNC system is unidirectional, so there is no stability problem of the control system, but because the error of the mechanical transmission...
发表评论
阅读全文

Tapping failure reasons analysis

After the first metal part be tapped, we always to check it: if pass the thread gauge inspection? The inspection result is OK, we can do mass production. If it fails, We should consider which reasons cause tapping faiulre. KYLT provide Metal Machining services for:  WEDM, EDM, DRILL, TAPPING ,  CNC LATHING ,  CNC MILLING ,  ALUMINUM / MAGNESIUM / PLASTIC RAPID PROTOTYPES MAKING . 1PCS ORDER IS ALLOWED. Aluminum CNC machined workpiece Normally, the following reasons may cause screw thread faiulre: 1) UNQUALIFIED TAP Tap is wear or bad 2) QUALIFIED DRILLING HOLE (BEFORE TAPPING) If the hole is too small, because of friction, will increase the difficulty of tapping, while tapping faster wear, and vice versa, the hole is too big, it can easily tap into, but the quality of teeth is very poor, because the diameter of teeth will become larger, relative to the screw nut bonding force is insufficient, easy to slide teeth. In M3 *0.5, the correct hole (general...
发表评论
阅读全文

CLASSIFY CNC MACHINE AS PER CNC SYSTEM FUNCTION LEVEL

To classify CNC machine as per function level of CNC system. According to the function level of CNC system, CNC system is usually divided into three categories: low, medium and high. This kind of classification is widely used in China. The boundaries of low, medium and high grades are relative, and the standards of division will be different in different periods. In terms of the current development level, various types of CNC systems can be divided into three categories: low, medium and high-end according to some functions and indicators. Among them, the middle and high-grade are generally called full function CNC or standard CNC. KYLT Aluminum profile CNC Machining (1) metal cutting CNC machine Refers to the use of turning, milling, collision, reaming, drilling, grinding, planing and other cutting processes of CNC machine tools. It can be divided into the following two categories. ① common CNC machine tools such as  CNC lathe ,  CNC milling  machine, CNC grindin...
发表评论
阅读全文