RadiatorsandCorrugated Cooler wallis the normal Transformer Cooler Part used to cool the transformer oil.
JTFY Corrugated Fins Wallalso named Corrugated Cooling Wall or corrugated transformer tank cooler ,it is one part of distribution transformer tank body.
welded corrugated finwall by JTFY auto fins wall seam welding machine
JTFY has Fully Automatic Corrugated Fin Walls pressing/folding/forming and welding machines for distribution transformers cooler(corrugated fin wall), with all the state of the art technologies.
We can manufacture corrugated walls with different profile, with spot welding, with strip.
Following the indications on the customer’s drawings, all kinds of bending may be carried out, on either side of the wall or on the whole wall, so that the tank construction may be completed with only one weld.
3.Corrugated FinsTransformer CoolerWall with Embossing:
Single Embossing & Double Embossing:
Corrugated Fins Wall with single & double Embossing
Bottom Embossing:
corrugated fin wall with embossing
Transformer Cooler – Corrugated Fins Walls technical details:
JTYF Fins Walls are manufactured with SPCC STEEL SHEET material height range from 400mm up to 1600mm, with thickness of 0,8mm – 1,0mm – 1,2mm – 1,5mm and with a depth of the fins from a minimum of 40mm to a maximum of 400mm.
On the Fins we could apply both embarrassments, to make stronger the fin wall, than spot welding, in order to grant an higher oil pressure resistance of the entire tank.
JTFY can manufacture also corrugated walls with full automatic. A better configuration of the space inside the fins in order to make the oil circulate better, helping the whole heat dissipation of the tank.
On the corrugated walls JTFY can apply a metallic strip that help the welder during assembling operations and welding processes, giving to him a perfect straight shape to handle and a strength edge resistance.
In the end JTFY can perform bending on the edge sides of the corrugated wall or bend directly in the middle of the fin wall that may be an half tank, saving time during welding operations.
Transformer Cooler-Corrugated Fins WallsEmbossing:
Now JTFY can produce Single, Double,Bottom Embossing Corrugated Fins Wall.The embossing has been designed to make the corrugated walls more stronger, especially in the big tanks where the pressure of the oil is huge and where the depth of the fins is high.
Servo control mode to classify CNC machine tool. (1) open loop control CNC machine tool The feed servo drive of this kind of machine tool is open-loop, that is, there is no detection feedback device. Generally, its driving motor is a stepping motor. The main feature of stepping motor is that every time the control circuit changes the command pulse signal, the motor will rotate a step angle, and the motor itself has self-locking ability. The drive circuit is controlled by the pulse distributor, which controls the coordinate displacement by changing the number of pulses, the displacement speed by changing the frequency of pulses, and the direction of displacement by changing the distribution sequence of pulses. Therefore, this control mode is characterized by convenient control, simple structure and low price. The command signal flow from the CNC system is unidirectional, so there is no stability problem of the control system, but because the error of the mechanical transmission...
After the first metal part be tapped, we always to check it: if pass the thread gauge inspection? The inspection result is OK, we can do mass production. If it fails, We should consider which reasons cause tapping faiulre. KYLT provide Metal Machining services for: WEDM, EDM, DRILL, TAPPING , CNC LATHING , CNC MILLING , ALUMINUM / MAGNESIUM / PLASTIC RAPID PROTOTYPES MAKING . 1PCS ORDER IS ALLOWED. Aluminum CNC machined workpiece Normally, the following reasons may cause screw thread faiulre: 1) UNQUALIFIED TAP Tap is wear or bad 2) QUALIFIED DRILLING HOLE (BEFORE TAPPING) If the hole is too small, because of friction, will increase the difficulty of tapping, while tapping faster wear, and vice versa, the hole is too big, it can easily tap into, but the quality of teeth is very poor, because the diameter of teeth will become larger, relative to the screw nut bonding force is insufficient, easy to slide teeth. In M3 *0.5, the correct hole (general...
Measures to improve the surface quality of machined parts Improve operator skills The operator must master the technology of tool fixing and tool setting. Tool fixing and tool setting is an important and very difficult basic work in CNC machining . The good and bad of tool loading and tool setting will directly affect the programming of machining program and the dimensional accuracy of machining parts. Only mastering the technology of tool setting and tool setting can guarantee the machining quality. The tool setting is generally divided into manual tool setting and automatic tool setting. At present, the vast majority of CNC machine tools use manual tool setting, and the commonly used tool setting method is trial cutting. It can get more accurate and reliable results. KYLT Stainless steel cnc turning service The simulation system of CNC lathe is used to check the program: after the program is input in the machine panel, the program must be simulated fir...
评论
发表评论