跳至主要内容

HOW DOES CNC MILLING WORK?

CNC milling is often referred to interchangeably as CNC machining, because both encompass a variety of operations that can be done within a CNC machining center.Equipped with vicious cutters, CNC milling is capable of producing almost any shape. Milling operations involve using multi-point rotary cutters to remove material from a work piece. Work piece materials ranges different from Plastic to Metals.

CNC milling operations have two types:

1.Face milling : it cuts flat surfaces into the work-piece and flat-bottomed cavities. The feed can be either horizontal or vertical.
2.Peripheral milling: Peripheral milling cuts deep slots, threads, and gear teeth.
CNC milling
CNC milling

Two ways of the work-piece be fed into the cutting tool:

1. Conventional milling involves feeding the work-piece against the cutter rotation. This is the recommended method for manual milling machines.
2. Climb milling, on the other hand, feeds the work-piece in the same direction as the cutter rotation. This is the preferred method for CNC milling.
Milling is best applied as a secondary process to an already machined work-piece. It helps to define features and serves as a “finishing coat”. Use milling as a secondary process to add features such as holes, slots, pockets, and contours.
KYLT has multiple tool-sets based on efficient cutters for Engineering- plastic or Ferrous / No-ferrous Metal material. The machine then rapidly mills parts out of the block in a subtraction manufacturing process that uses either 3 or 4 axis milling.
At KYLT, CNC milling also encompasses drilling, reaming, threading, tapping, and other operations, as they can be completed in the same setup.

CNC Milling Cost:

Wide range of potential milling applications makes CNC machining the most variable service KYLT offers. Requirements of Milled parts Tolerance, Surface finish or treatment, Part size, use of Tooling or Jigs and material properties can all directly affect pricing. Providing a 3D CAD file can generally reduce time spent quoting or programming.

CNC Milled Parts Surface:

Machined plastic parts show visible tool marks on surface. A suitable cut tools will improve the milled plastic parts surface.
Metal parts allow more finishing choices. Polishing, Painting, Powder coating, Anodizing, Plating can be done on metal milled parts.

MORE INFORMATION ABOUT KYLT CNC MACHINING SERVICE– CNC MILLED PART, CNC TURNED PART, RAPID PROTOTYPING, PLEASE CONTACT US: WECHAT: (86) 15195010186 EMAIL: STONECHENPENG@ALIYUN.COM
LEARN MORE ABOUT KYLT CNC MACHINED PARTS. OR GOT QUOTATION SOON: STONECHENPENG@ALIYUN.COM
KYLT CNC Machining Services:
KYLT CNC Precision Machined Parts:
More information about Machining Technology:
标签：

评论

发表评论

此博客中的热门博文

CNC MACHINE BE CLASSIFIED BY SERVO CONTROL MODE

Servo control mode to classify CNC machine tool. (1) open loop control CNC machine tool The feed servo drive of this kind of machine tool is open-loop, that is, there is no detection feedback device. Generally, its driving motor is a stepping motor. The main feature of stepping motor is that every time the control circuit changes the command pulse signal, the motor will rotate a step angle, and the motor itself has self-locking ability. The drive circuit is controlled by the pulse distributor, which controls the coordinate displacement by changing the number of pulses, the displacement speed by changing the frequency of pulses, and the direction of displacement by changing the distribution sequence of pulses. Therefore, this control mode is characterized by convenient control, simple structure and low price. The command signal flow from the CNC system is unidirectional, so there is no stability problem of the control system, but because the error of the mechanical transmission...
发表评论
阅读全文

Tapping failure reasons analysis

After the first metal part be tapped, we always to check it: if pass the thread gauge inspection? The inspection result is OK, we can do mass production. If it fails, We should consider which reasons cause tapping faiulre. KYLT provide Metal Machining services for:  WEDM, EDM, DRILL, TAPPING ,  CNC LATHING ,  CNC MILLING ,  ALUMINUM / MAGNESIUM / PLASTIC RAPID PROTOTYPES MAKING . 1PCS ORDER IS ALLOWED. Aluminum CNC machined workpiece Normally, the following reasons may cause screw thread faiulre: 1) UNQUALIFIED TAP Tap is wear or bad 2) QUALIFIED DRILLING HOLE (BEFORE TAPPING) If the hole is too small, because of friction, will increase the difficulty of tapping, while tapping faster wear, and vice versa, the hole is too big, it can easily tap into, but the quality of teeth is very poor, because the diameter of teeth will become larger, relative to the screw nut bonding force is insufficient, easy to slide teeth. In M3 *0.5, the correct hole (general...
发表评论
阅读全文

SELECTION PRINCIPLE OF CUTTING PARAMETERS FOR SCREW THREAD TURNING

Because the pitch (or lead) of the thread is specified by the drawing, the key to choose the cutting parameters when  turning  the screw thread is to determine the spindle speed n and the cutting depth AP. 1) SELECTION OF SPINDLE SPEED TO DO SCREW THREAD TURNING According to the mechanism that the spindle turns 1 and the cutter feeds 1 lead when turning the thread, the feed speed of the CNC lathe is determined by the selected spindle speed. The thread lead (which is the pitch when the thread is single head thread) instructed in the thread processing program section is equivalent to the feed speed VF VF = n f (1) expressed by the feed rate f (mm / R) From Formula 1, it can be seen that the feed speed VF is proportional to the feed amount F. if the spindle speed of the machine tool is selected too high, the converted feed speed will greatly exceed the rated feed speed of the machine tool. Therefore, when selecting the rotation speed of the main shaft for turning the threa...
发表评论
阅读全文