跳至主要内容

transformer corrugated fin wall Single Embossing Welding Machine

JTFY 1*50 Automatic Single embossing Welding Machine for Corrugated Fin Wall Transformer Tank
Embossing Welding machine is a special manufactured automatic machine,it is not a standard machine in the Auto Corrugated fin wall manufacturing line.
In some design, Corrugated Fin wall need make one or two stiffeners on the corrugated fin wall to give it more strength.
So, in transformer radiator manufacturing process, the one stiffener fin wall named ONE or SINGLE EMBOSSING CORRUGATED FIN WALL; two stiffer is DOUBLE EMBOSSING CORRUGATED FIN WALL.
Corrugated Fins Wall with single & double EmbossingCorrugated Fins Wall with single & double Embossing
The Embossing Welding Machine is used to weld stiffeners which on Corrugated fin wall middle.
Embossing welding
Embossing welding

JTFY Automatic Single Spot Welding Machine, also named Single Embossing Welding machine.

Overview of One embossing) welding machine:

JTFY-1 X 50 automatic spot welding machine for transformer corrugated tank is a special equipment used for spot welding of reinforcing ribs of corrugated fin wall.

Single Embossing Welding Machine Main technical parameters:

Input power supply: three-phase AC380V + 10%
Frequency: 50Hz
Welder power capacity: 100KVA
Control box power supply capacity: three-phase 380V, 8KW
Welding rated primary current: 160A
Secondary no-load voltage: 7.2V
Load duration: 50%
Pressure of gas source system: greater than 0.4 Mpa
Cooling water flow and pressure: 30L/min 0.2Mpa
Maximum thickness of welded workpiece: 1.5 + 1.5mm
Welding workpiece height: 100mm-400mm
Welding workpiece length: 300mm-1300mm
Welding machine shape size: 4500x2400x2300mm

Composition of Single spot (Single embossing) welding machine:

This machine is composed of frame, beam column and XYZ three-axis motion control system. The X-axis is left and right motion of servo motor, the Z-axis is up and down motion of servo motor, which is digitally controlled by PLC. The Y-axis is a chain transmission for the workpiece of the lower bracket, and the power is a frequency conversion motor.

Automatic Single Spot (embossing) Welding Machine Manufacturing Cycle and Price:

  1. Production cycle: 45 days.
  2. Price: as per corrugated fin wall structure and requirements.

More information about our Transformer Corrugated Fins Wall Folding & Welding Manufacturing, please feel free to contact with us :+008615195010186 cnkylt@aliyun.com

Related Products of Transformer Tank Machinery :

1.JTFY Full Automatic Corrugated Fins Wall Pressing and Welding Manufacturing line.

2.Full-automatic PLC Transformer Tank Corrugated Fins Froming/Pressing/Folding Machine

3.Full-auto PLC Transformer Tank Corrugated Fins Seam Welding Machine

4.Hydraulic Decoiler

5.Corrugated Fins Leakage Testing Machine

CONTACT WITH US:+008615195010186 cnkylt@aliyun.com

标签：

评论

发表评论

此博客中的热门博文

CNC MACHINE BE CLASSIFIED BY SERVO CONTROL MODE

Servo control mode to classify CNC machine tool. (1) open loop control CNC machine tool The feed servo drive of this kind of machine tool is open-loop, that is, there is no detection feedback device. Generally, its driving motor is a stepping motor. The main feature of stepping motor is that every time the control circuit changes the command pulse signal, the motor will rotate a step angle, and the motor itself has self-locking ability. The drive circuit is controlled by the pulse distributor, which controls the coordinate displacement by changing the number of pulses, the displacement speed by changing the frequency of pulses, and the direction of displacement by changing the distribution sequence of pulses. Therefore, this control mode is characterized by convenient control, simple structure and low price. The command signal flow from the CNC system is unidirectional, so there is no stability problem of the control system, but because the error of the mechanical transmission...
发表评论
阅读全文

Tapping failure reasons analysis

After the first metal part be tapped, we always to check it: if pass the thread gauge inspection? The inspection result is OK, we can do mass production. If it fails, We should consider which reasons cause tapping faiulre. KYLT provide Metal Machining services for:  WEDM, EDM, DRILL, TAPPING ,  CNC LATHING ,  CNC MILLING ,  ALUMINUM / MAGNESIUM / PLASTIC RAPID PROTOTYPES MAKING . 1PCS ORDER IS ALLOWED. Aluminum CNC machined workpiece Normally, the following reasons may cause screw thread faiulre: 1) UNQUALIFIED TAP Tap is wear or bad 2) QUALIFIED DRILLING HOLE (BEFORE TAPPING) If the hole is too small, because of friction, will increase the difficulty of tapping, while tapping faster wear, and vice versa, the hole is too big, it can easily tap into, but the quality of teeth is very poor, because the diameter of teeth will become larger, relative to the screw nut bonding force is insufficient, easy to slide teeth. In M3 *0.5, the correct hole (general...
发表评论
阅读全文

MEASURES TO IMPROVE THE MACHINED PARTS SURFACE QUALITY

Measures to improve the surface quality of  machined parts Improve operator skills The operator must master the technology of tool fixing and tool setting. Tool fixing and tool setting is an important and very difficult basic work in  CNC machining . The good and bad of tool loading and tool setting will directly affect the programming of machining program and the dimensional accuracy of  machining parts.  Only mastering the technology of tool setting and tool setting can guarantee the machining quality. The tool setting is generally divided into manual tool setting and automatic tool setting. At present, the vast majority of CNC machine tools use manual tool setting, and the commonly used tool setting method is trial cutting. It can get more accurate and reliable results. KYLT Stainless steel cnc turning service The simulation system of CNC lathe is used to check the program: after the program is input in the machine panel, the program must be simulated fir...
发表评论
阅读全文