跳至主要内容

KYLT auto parts die casting machines and auto die casting parts making

KYLT Auto parts die casting machines type:

  1. Aluminum Auto parts die casting machines: 150T~2000T to produce all kinds of aluminum automotive parts. 

  2. Zinc/Zamak Auto parts die casting machine: For small Zinc / Zamak alloy automoitve electronic parts and brake wire system.

(Aluminum, Zamak/Zinc die casting machines price, pls. email: cnkylt@aliyun.com)

aluminum auto part die casting machine

Aluminum Die Casting Automotive Parts Usage:

1. Car body: Now electric car/vehicle are developing quickly. Tesla car bodies are made from aluminum by die casting.

2. Engine Parts: Engine assembly mounting system, cylinder heads and engine covers etc are die cast aluminum parts.

3. Brackets: Such as Automobile engine support parts.

4. Electronic Box,Shell and Covers: Such as gearbox, motor, shades pole and motor covers are made from aluminum alloy by die casting.

5. Other auto parts such as car door handle, auto fork, components etc automotive parts are made by die casting.

For high pressure hot chamber die casting machine, which used to produce small zinc/zamak alloy auto parts. Such as car door handle, Car Cigarette Lighter etc small parts.

(Aluminum auto parts die casting mold and parts manufacturing, pls. email: cnkylt@aliyun.com)

auto parts die casting machine

Zamak/Zinc Die Casting Automotive Parts Usage:

  1. Car lamp parts

    zinc alloy car LED light part

  2. Brake cable

    brake wire with zinc end cast by vertical die casting machine

  3. Door handles

    bus door handle(zinc) by 180T die casting machine

  4. others

(Zamak Zinc auto parts die casting mold and parts manufacturing, pls. email: cnkylt@aliyun.com)



KYLT Industrial is your trustable Aluminum Die casting machines manufacturer, supplier & factory. More information of Aluminum die casting machines price or technical parameters, please email us: cnkylt@aliyun.com

For Aluminum, Zinc/Zamak die casting parts service, price, die casting mold making service and price, pls. email us: cnkylt@aliyun.com

标签：

评论

发表评论

此博客中的热门博文

CNC MACHINE BE CLASSIFIED BY SERVO CONTROL MODE

Servo control mode to classify CNC machine tool. (1) open loop control CNC machine tool The feed servo drive of this kind of machine tool is open-loop, that is, there is no detection feedback device. Generally, its driving motor is a stepping motor. The main feature of stepping motor is that every time the control circuit changes the command pulse signal, the motor will rotate a step angle, and the motor itself has self-locking ability. The drive circuit is controlled by the pulse distributor, which controls the coordinate displacement by changing the number of pulses, the displacement speed by changing the frequency of pulses, and the direction of displacement by changing the distribution sequence of pulses. Therefore, this control mode is characterized by convenient control, simple structure and low price. The command signal flow from the CNC system is unidirectional, so there is no stability problem of the control system, but because the error of the mechanical transmission...
发表评论
阅读全文

Tapping failure reasons analysis

After the first metal part be tapped, we always to check it: if pass the thread gauge inspection? The inspection result is OK, we can do mass production. If it fails, We should consider which reasons cause tapping faiulre. KYLT provide Metal Machining services for:  WEDM, EDM, DRILL, TAPPING ,  CNC LATHING ,  CNC MILLING ,  ALUMINUM / MAGNESIUM / PLASTIC RAPID PROTOTYPES MAKING . 1PCS ORDER IS ALLOWED. Aluminum CNC machined workpiece Normally, the following reasons may cause screw thread faiulre: 1) UNQUALIFIED TAP Tap is wear or bad 2) QUALIFIED DRILLING HOLE (BEFORE TAPPING) If the hole is too small, because of friction, will increase the difficulty of tapping, while tapping faster wear, and vice versa, the hole is too big, it can easily tap into, but the quality of teeth is very poor, because the diameter of teeth will become larger, relative to the screw nut bonding force is insufficient, easy to slide teeth. In M3 *0.5, the correct hole (general...
发表评论
阅读全文

SELECTION PRINCIPLE OF CUTTING PARAMETERS FOR SCREW THREAD TURNING

Because the pitch (or lead) of the thread is specified by the drawing, the key to choose the cutting parameters when  turning  the screw thread is to determine the spindle speed n and the cutting depth AP. 1) SELECTION OF SPINDLE SPEED TO DO SCREW THREAD TURNING According to the mechanism that the spindle turns 1 and the cutter feeds 1 lead when turning the thread, the feed speed of the CNC lathe is determined by the selected spindle speed. The thread lead (which is the pitch when the thread is single head thread) instructed in the thread processing program section is equivalent to the feed speed VF VF = n f (1) expressed by the feed rate f (mm / R) From Formula 1, it can be seen that the feed speed VF is proportional to the feed amount F. if the spindle speed of the machine tool is selected too high, the converted feed speed will greatly exceed the rated feed speed of the machine tool. Therefore, when selecting the rotation speed of the main shaft for turning the threa...
发表评论
阅读全文