跳至主要内容

GFRP PRODUCTS &WELDING PARTS FOR MOBILE/CELL PHONE SIGNAL TOWER

GFRP (Glass Fiber Reinforced Plastic) frame, shell, house for Cell phone/Mobile phone Tel-communication signal tower. The finished product normally consist two elements: GFRP & Steel Welding Frame.

What is GFRP & the usage?

FRP (FRP) also known as GFRP, that is, fiber reinforced plastics, generally refers to glass fiber reinforced unsaturated polyester, epoxy resin and phenolic resin matrix. Glass fiber or its products as reinforcement of the material, the appellation of glass fiber reinforced plastics, or the appellation FRP, attention and tempered glass to distinguish. Because of the different varieties of resins used, there are polyester FRP, epoxy FRP, phenolic FRP. Light and hard, non-conductive, stable performance. High mechanical strength, less recycling, corrosion resistance. Can replace steel manufacturing machine parts and automobiles, ships shell and so on.
telecommunication signal tower GFRP frame
telecommunication signal tower GFRP frame
KYLT produce all kinds of large or samll sizes GFRP products as per clients drawings. With good quality, our products are service for china union & china mobile company.

About the Steel workpieces.

Steel stamping part, Welding part and their assembly products. They are relation products used in signal tower.
KYLT provide excellent welding parts with hot galvanizing to guarantee steel part have good corrosion resistant function.
telecommunication signal tower steel welding parts
telecommunication signal tower steel welding parts

Stamping parts materials and surface finish treatment.

KYLT Sheet metal stamping/punching welding parts for Aluminum, Steel iron, Stainless steel Products. Surface with plating, powder coating, painting is allowed.
KYLT Precision CNC machining services (milling & turning service), Fast prototyping, Fixture/Jig/Tooling making, Aluminum die casting & plastic injection parts. Email:cnkylt@aliyun.com +008615195010186
KYLT CNC Machining Services:
KYLT CNC Precision Machined Parts:
More information about Machining Technology:
标签：

评论

发表评论

此博客中的热门博文

CNC MACHINE BE CLASSIFIED BY SERVO CONTROL MODE

Servo control mode to classify CNC machine tool. (1) open loop control CNC machine tool The feed servo drive of this kind of machine tool is open-loop, that is, there is no detection feedback device. Generally, its driving motor is a stepping motor. The main feature of stepping motor is that every time the control circuit changes the command pulse signal, the motor will rotate a step angle, and the motor itself has self-locking ability. The drive circuit is controlled by the pulse distributor, which controls the coordinate displacement by changing the number of pulses, the displacement speed by changing the frequency of pulses, and the direction of displacement by changing the distribution sequence of pulses. Therefore, this control mode is characterized by convenient control, simple structure and low price. The command signal flow from the CNC system is unidirectional, so there is no stability problem of the control system, but because the error of the mechanical transmission...
发表评论
阅读全文

Tapping failure reasons analysis

After the first metal part be tapped, we always to check it: if pass the thread gauge inspection? The inspection result is OK, we can do mass production. If it fails, We should consider which reasons cause tapping faiulre. KYLT provide Metal Machining services for:  WEDM, EDM, DRILL, TAPPING ,  CNC LATHING ,  CNC MILLING ,  ALUMINUM / MAGNESIUM / PLASTIC RAPID PROTOTYPES MAKING . 1PCS ORDER IS ALLOWED. Aluminum CNC machined workpiece Normally, the following reasons may cause screw thread faiulre: 1) UNQUALIFIED TAP Tap is wear or bad 2) QUALIFIED DRILLING HOLE (BEFORE TAPPING) If the hole is too small, because of friction, will increase the difficulty of tapping, while tapping faster wear, and vice versa, the hole is too big, it can easily tap into, but the quality of teeth is very poor, because the diameter of teeth will become larger, relative to the screw nut bonding force is insufficient, easy to slide teeth. In M3 *0.5, the correct hole (general...
发表评论
阅读全文

SELECTION PRINCIPLE OF CUTTING PARAMETERS FOR SCREW THREAD TURNING

Because the pitch (or lead) of the thread is specified by the drawing, the key to choose the cutting parameters when  turning  the screw thread is to determine the spindle speed n and the cutting depth AP. 1) SELECTION OF SPINDLE SPEED TO DO SCREW THREAD TURNING According to the mechanism that the spindle turns 1 and the cutter feeds 1 lead when turning the thread, the feed speed of the CNC lathe is determined by the selected spindle speed. The thread lead (which is the pitch when the thread is single head thread) instructed in the thread processing program section is equivalent to the feed speed VF VF = n f (1) expressed by the feed rate f (mm / R) From Formula 1, it can be seen that the feed speed VF is proportional to the feed amount F. if the spindle speed of the machine tool is selected too high, the converted feed speed will greatly exceed the rated feed speed of the machine tool. Therefore, when selecting the rotation speed of the main shaft for turning the threa...
发表评论
阅读全文