跳至主要内容

Advantages and Disadvantages between Dry & Oil immersed type High Voltage Transformer

The most common types of high voltage transformer are Dry Type and Oil-immersed Type. Today let’s talk about their advantages and disadvantages and differences.

Oil Immersed Transformer:

transformer structure (photo from Google)
Oil Filled Transformer have two types: Corrugated Fins Wall Cooling Type & Radiators with Cooling Fans
Corrugated Fins Wall is made by SPCC steel roll by folding, forming and welding method. JTFY Full Auto Corrugated Fins Wall Manufacturing Line consists of: Steel Coil Feeding-Hydraulic Decoiler, Auto Steel Folding& Forming Machine, Auto Corrugated Fins Seam Welding Machine, And Leakage testing Machine.Which make the Complete Production of Corrugated Fins Wall automatically.

Dry type transformer:

Dry type transformer

Advantages and disadvantages of dry-type transformer and oil-immersed transformer:

1.Dry-type transformer is more expensive than oil in price.
2.In Capacity, large capacity oil changes more than dry capacity.
3.Dry transformations are required in complex buildings (basements, floors, roofs, etc.) and crowded places. Oil transformer is used in independent transformer substation.
4.The transformer inside the box transformer usually adopts the Dry-type transformer. Outdoor temporary electricity is usually changed by Oil type transformer.
5.Dry type and Oil type Transformers can be selected according to space during construction. Oil type can be selected when space is large, and Dry type can be selected when space is crowded.
6.Regional climate is humid and muggy areas, better to use oil type transformer. If dry type is used, forced air cooling equipment must be equipped.
More informaiton of JTFY Corrugated Fins Wall Machine,please email: cnkylt@aliyun.com  Whatsapp/wechat: 15195010186

RELATED PRODUCTS:

transformer oil tank corrugated fin production line is full automatically
corrugated fins welding machine
Hydraulic decoiler used to load steel roll
corrugated fins wall leakage testing machine

Want to know more?(Marketing Title)

Phone: 008615195010186
Email: cnkylt@aliyun.com
标签：

评论

发表评论

此博客中的热门博文

CNC MACHINE BE CLASSIFIED BY SERVO CONTROL MODE

Servo control mode to classify CNC machine tool. (1) open loop control CNC machine tool The feed servo drive of this kind of machine tool is open-loop, that is, there is no detection feedback device. Generally, its driving motor is a stepping motor. The main feature of stepping motor is that every time the control circuit changes the command pulse signal, the motor will rotate a step angle, and the motor itself has self-locking ability. The drive circuit is controlled by the pulse distributor, which controls the coordinate displacement by changing the number of pulses, the displacement speed by changing the frequency of pulses, and the direction of displacement by changing the distribution sequence of pulses. Therefore, this control mode is characterized by convenient control, simple structure and low price. The command signal flow from the CNC system is unidirectional, so there is no stability problem of the control system, but because the error of the mechanical transmission...
发表评论
阅读全文

Tapping failure reasons analysis

After the first metal part be tapped, we always to check it: if pass the thread gauge inspection? The inspection result is OK, we can do mass production. If it fails, We should consider which reasons cause tapping faiulre. KYLT provide Metal Machining services for:  WEDM, EDM, DRILL, TAPPING ,  CNC LATHING ,  CNC MILLING ,  ALUMINUM / MAGNESIUM / PLASTIC RAPID PROTOTYPES MAKING . 1PCS ORDER IS ALLOWED. Aluminum CNC machined workpiece Normally, the following reasons may cause screw thread faiulre: 1) UNQUALIFIED TAP Tap is wear or bad 2) QUALIFIED DRILLING HOLE (BEFORE TAPPING) If the hole is too small, because of friction, will increase the difficulty of tapping, while tapping faster wear, and vice versa, the hole is too big, it can easily tap into, but the quality of teeth is very poor, because the diameter of teeth will become larger, relative to the screw nut bonding force is insufficient, easy to slide teeth. In M3 *0.5, the correct hole (general...
发表评论
阅读全文

SCREW THREAD MACHINING METHOD

In  Metal parts machining  works, screw thread (tapping) be required. The screw thread is mainly divided into: connecting thread and driving thread For  connecting thread , the main  machining  methods are: tapping, threading, turning, rolling, etc. For  transmission thread , the main  machining methods  are: rough and fine turning – grinding；whirlwind  milling  – rough and fine  turning , etc. CNC turned screw thread part The following describes the various screw machining methods: THREAD CUTTING Generally, it refers to the method of machining thread on workpiece with forming tool or grinding tool, mainly including  turning , milling, tapping, threading, grinding and whirlwind cutting, etc. THREAD MILLING On the thread milling machine, the disc milling cutter or comb milling cutter is used for milling. Disc  milling  cutter is mainly used for milling trapezoid external thread of screw rod, worm and o...
发表评论
阅读全文