跳至主要内容

China Electrical Power Transformer Development trend

China Development Trend of Electrical Power Transformer Industry
The development of Electrical Power Transformer manufacturing technology mainly combines with the characteristics of new products and new structures, and focuses on the development and application of new materials and equipment to continuously improve the quality and reliability of products.

Rods Auto Insert and Welding Machine
However, the research and development of these new technologies requires a lot of capital investment and production costs. At present, the supply of Electrical Power Transformer in our country exceeds the demand, the price competition is extremely fierce, and the first choice for users in bidding activities is the price factor.
Therefore, it is difficult for manufacturers to make a large amount of investment, so that production technology can not be developed, product quality can not be improved, quality can not be improved, price will not be high, and no profit will result in a vicious circle.

good welded Corrugated fins wall
good welded Corrugated fins wall
Therefore, the relevant departments regulate the price of transformer. The law should be given full attention and improved reasonably.
In the future, the development direction of transformers in China will still be energy-saving, low noise, fire and explosion-proof and high reliability.
Therefore, some of the above-mentioned technologies will continue to be popularized. In addition, high-quality and low-loss magnetic conductive materials are selected, laser irradiation or grooved silicon steel sheets are selected for large-scale products, and advanced production equipment such as winding machine with axial amplitude compression device, vapor coherent drying equipment and step-by-step shear line should be widely used.
As far as possible, the processing of insulating materials should be unified by professional manufacturers to gradually increase new solid insulating materials such as injection moulding parts. Laser cutting for processing insulating parts abroad can also be developed in China.
In addition, great efforts should be made to study the external quality of Electrical Power Transformer, such as tank surface treatment, types of paint, etc. to make the tank as beautiful as possible.
More information about our Transformer Corrugated Fins Production Line, please feel free to contact with us : cnkylt@aliyun.com

RELATED PRODUCTS:


transformer oil tank corrugated fin production line is full automatically
transformer oil tank corrugated fin production line is full automatically

2.Corrugated Fins Wall Forming Machine

corrugated fins wall making machine
corrugated fins wall making machine


Hydraulic decoiler used to load steel roll
Hydraulic decoiler used to load steel roll


corrugated fins wall leakage testing machine
corrugated fins wall leakage testing machine


Want to know more?(Marketing Title)

Phone: 008615195010186
Email: cnkylt@aliyun.com

评论

发表评论

此博客中的热门博文

How to choose Distribution Transformer?

The Key Selection points of   Oil-Immersed Distribution Transformer . Load Properties of Distribution Transformer: 1) When there are a large number of primary or secondary loads, it is advisable to install two or more transformers. When one transformer is disconnected, the capacity of the remaining transformers can meet the demand of primary and secondary loads. First, the secondary loads should be concentrated as far as possible and should not be too dispersed. 2) When seasonal load capacity is large, special transformer should be installed. For example, in large civil buildings, the load of air conditioning refrigerators, heating electricity and heat, etc. 3) When the concentrated load is large, special transformer should be installed. Such as large heating equipment, large X-ray machine, electric arc furnace, etc. 4) When the lighting load is large or the power and lighting use common transformer seriously affects the lighting quality and lamp life, special lighting tra
1 条评论
阅读全文

JTFY AUTO CORRUGATED FIN WALL PRODUCTION LINE REACH KAILI POWER FACTORY

Shandong Kaili Power is a new national factory, which focus on all kinds of Electrical Distribution Transformer manufacturing. electrical power transformer factory This time, they purchased  JTFY 1300*400 full automatic transformer tank corrugated fin wall production line . The whole production line involve:  Hydraulic decoiler  ( steel roll holding & feeding machine ),  Corrugated fin wall folding machine ,  Corrugated fin wall steel ribs insert and fin seam welding machine . JTFY transformer tank corrugated fin wall making line Corrugated Fin Wall Forming Machine , automatic controlled by PLC. Which is used to make  Corrugated Fins Wall  for  Distribution Transformer Tanks . By  Folding  and  Forming  Metal Sheet to demand shapes,so this machine also named  Corrugated Fins Wall Folding Machine ,  Corrugated fin wall Pressing Machine  or  Corrugated Wall Making Machine . Folding machine usage :   Corrugated fin forming length 300-2000mm, width 300-1300mm, height 50-400m
发表评论
阅读全文

What is Die Casting Machine - Types of Die Casting Machine | KYLT Industrial

  What is Die Casting Machine - Die Casting Machine Types, Die-casting mould & Die casting parts Die casting process , by injecting molten metal under pressure into die casting dies or molds.  Die casting mould  consists two halves: fixed die half, movable die half. Metal shapes are formed by mold cavity. When mold open, we can obtain the cast metal parts.  The machine which used to finish the die casting process is named Die casting machine. It has two mechanism:  Cold chamber  &  Hot Chamber . Here, we will introduce the equipment for this process, what is die casting machine, die casting machine types, their mechanism & features, how to choose suitable die casting machine. What is Die Casting Machine? Die casting machine  is one kind non-ferrous metal products making mechinery. It is a metal casting process, by inject molten metal into the mold cavity, the shape of the  die casting parts  will be formed when the metal is cool and solidified. This manufacturing method can
发表评论
阅读全文