跳至主要内容

JTFY Automaitc Rods Auto Insert & Welding Machine for Transformer Tank Cooler Fin

Transformer Tank Cooler Fin Rods Auto Insert and Welding Machine is used to weld steel rods on the two sides of Corrugated Fin top as below:
rods welded Corrugated fin transformer tank wall
Corrugated fin transformer tank wall

Rods Auto Insert and Welding Machine can weld two Steel Rods and Fin seams at one time.

automatic rod insertion welding machine
automatic rod insertion welding machine

corrugated cooler wall welding machine
corrugated cooler wall welding machine

The welded area is smooth and bright.
As A accessory machine, JTYF Rods Auto Insert and Welding Machine can be operated automatically. Other transformer machine supplier need weld two fins terminals to hold the rods, which is slow and low efficiency.
Transformer tank fin rod insert and welding machine,which set steel rods on corrugated fin top automatically. Then the welding mechanism weld the rod and corrugated fin together. And the corrugated fins seam also be welded.
auto rod insert welding machine body
auto rod insert welding machine body


Rods Auto Insert and Welding Machine be welded and ready for heat treatment:
Rods Auto Insert and Welding Machine
Rods Auto Insert and Welding Machine

After the heat treatment of Transformer Tank Cooler Fins Rods Auto Insert and Welding Machine, we will equipping the mechanism, electrical etc structure and element on it to achieve auto welding function.
More information about our Transformer Corrugated Fins Production Line, please feel free to contact with us : cnkylt@aliyun.com

RELATED PRODUCTS:


transformer oil tank corrugated fin production line is full automatically
transformer oil tank corrugated fin production line is full automatically

2.Corrugated Fins Wall Forming Machine

corrugated fins wall making machine
corrugated fins wall making machine


Hydraulic decoiler used to load steel roll
Hydraulic decoiler used to load steel roll


corrugated fins wall leakage testing machine
corrugated fins wall leakage testing machine

Want to know more?(Marketing Title)

Phone: 008615195010186
Email: cnkylt@aliyun.com
标签：

评论

发表评论

此博客中的热门博文

Tapping failure reasons analysis

After the first metal part be tapped, we always to check it: if pass the thread gauge inspection? The inspection result is OK, we can do mass production. If it fails, We should consider which reasons cause tapping faiulre. KYLT provide Metal Machining services for:  WEDM, EDM, DRILL, TAPPING ,  CNC LATHING ,  CNC MILLING ,  ALUMINUM / MAGNESIUM / PLASTIC RAPID PROTOTYPES MAKING . 1PCS ORDER IS ALLOWED. Aluminum CNC machined workpiece Normally, the following reasons may cause screw thread faiulre: 1) UNQUALIFIED TAP Tap is wear or bad 2) QUALIFIED DRILLING HOLE (BEFORE TAPPING) If the hole is too small, because of friction, will increase the difficulty of tapping, while tapping faster wear, and vice versa, the hole is too big, it can easily tap into, but the quality of teeth is very poor, because the diameter of teeth will become larger, relative to the screw nut bonding force is insufficient, easy to slide teeth. In M3 *0.5, the correct hole (general...
发表评论
阅读全文

CNC MACHINE BE CLASSIFIED BY SERVO CONTROL MODE

Servo control mode to classify CNC machine tool. (1) open loop control CNC machine tool The feed servo drive of this kind of machine tool is open-loop, that is, there is no detection feedback device. Generally, its driving motor is a stepping motor. The main feature of stepping motor is that every time the control circuit changes the command pulse signal, the motor will rotate a step angle, and the motor itself has self-locking ability. The drive circuit is controlled by the pulse distributor, which controls the coordinate displacement by changing the number of pulses, the displacement speed by changing the frequency of pulses, and the direction of displacement by changing the distribution sequence of pulses. Therefore, this control mode is characterized by convenient control, simple structure and low price. The command signal flow from the CNC system is unidirectional, so there is no stability problem of the control system, but because the error of the mechanical transmission...
发表评论
阅读全文

SELECTION PRINCIPLE OF CUTTING PARAMETERS FOR SCREW THREAD TURNING

Because the pitch (or lead) of the thread is specified by the drawing, the key to choose the cutting parameters when  turning  the screw thread is to determine the spindle speed n and the cutting depth AP. 1) SELECTION OF SPINDLE SPEED TO DO SCREW THREAD TURNING According to the mechanism that the spindle turns 1 and the cutter feeds 1 lead when turning the thread, the feed speed of the CNC lathe is determined by the selected spindle speed. The thread lead (which is the pitch when the thread is single head thread) instructed in the thread processing program section is equivalent to the feed speed VF VF = n f (1) expressed by the feed rate f (mm / R) From Formula 1, it can be seen that the feed speed VF is proportional to the feed amount F. if the spindle speed of the machine tool is selected too high, the converted feed speed will greatly exceed the rated feed speed of the machine tool. Therefore, when selecting the rotation speed of the main shaft for turning the threa...
发表评论
阅读全文